TGZ580 PLUS V5 Pro Edition
TGZ580 PLUS is a gyro system which is used to stabilize and control your flybarless RC Helikopter on all three flight axis. It can be used with many different types of helicopters like 3D aerobatic helis, F3C competition helicopters as well as scale helicopters with 2 or more rotorblades. The system comes with basic flybarless stabilization functionality
This is the "Pro Edition" version, This enables additional features like AttitudeControl for recue bailout or constant leveling and a feature called Bank Switching which allows to change between different parameter presets in flight to serve different flight conditions or flying styles.
To setup TGZ580 PLUS there is no need for any additional devices. All you need is your radio system and your helicopter. Thanks to the well proven EasySetup system you can do all the necessary adjustment directly at the device and in very short time. If you like to get more insight into the system and like to have a more visualized type of setup you can also use the StudioX App for PC/Mac or StudioXm for your smartphone/tablet in combination with the USB2SYS interface (PC/Mac) or BLE2SYS interface (smartphone/tablet) (optional available). These apps are the source to get even more out of your device like saving/restoring paramaters, loading preset heli configurations and making advanced adjustment to fully customize the device to your needs.
**** Attitude Control & Bank Switching
*** Attitude Control
The Attitude Control feature offers different modes for self leveling and stabilizing the helicopter automatically. You can choose between "Bailout rescue mode", "3D-Mode" and "Angular mode" which will make your heli fly like a quad. Basically when you activate the Attitude Control in flight it will turn your helicopter back to level position when you release the sticks.
There are even more options like pitch input control and locking mechanisms to prevent the pilot from adding wrong stick input. Attitude Control will turn TGZ580 PLUS into a perfect training partner and helping hand to train flying, learn new maneuvers or simply give a good feel of having a backup!
*** Bank Switching
With Bank Switching you can change between 3 different parameter sets in flight, instead of using only one fixed parameter set. This allows to adapt the system to different flight conditions or different rotorhead speeds, i.e. when hovering, cruising, speed flying, landing and so on. Or you can use the Bank Switching to selectively change specific parameters, i.e. switch between different rescue modes or test the effects of a parameter. Please note that due to the variety of setup options it is only possible to enable and setup the bank switching with the StudioX computer software or StudioXm App for mobile devices.
Servo pulse rates:
*. supports nearly all types of swashplate and rudder servos
*. Swashplate: 50 - 333Hz
*. Rudder: 50 - 560Hz
Preset swashplate mixing:
*. eCCPM: 90 (3/4 servos), 120, 135/140
Or freely adjustable with StudioX software
*. Single channels
*. PPM serial pulse
*. BEASTX SRXL
*. Spektrum SRXL/SRXL2
*. JR XBus
*. Graupner HOTT SUMD
*. Multiplex SRXL V1+V2
*. Jeti UDI/ExBus
*. Futaba S.Bus/S.Bus2
*. Spektrum remote receiver (DSM2/DSMX)
*. JR RJ01 remote receiver (DMSS)
*. ALIGN/FlySky iBus
Input voltage : 4.5V - 10V DC
Processor : 32 Bit ARM
Sensor : 6-Axis MEMS (Gyro + Accelerometer)
Dimensions : 36 x 25 x 14 mm
Weight (w/o wiring): ca. 11g
BLE2SYS Bluetooth smart interface
Make your MICROBEAST PLUS even smarter!
BLE2SYS is a Bluetooth Smart Interface that allows to connect your MICROBEAST PLUS / MICROBEAST PLUS HD / TGZ580 PLUS to your smartphone or tablet. With the StudioXm App (available for Android and iOS) you can easily configure the system, create backups of your settings, load heli presets, upload firmware update files to your unit and much more. Please note that your mobile device must be Bluetooth Smart/Bluetooth LE compatible.
Please pay special attention to:
Fit for MICROBEAST PLUS / MICROBEAST PLUS HD / TGZ580 PLUS
Not fit MICROBEAST / TGZ580
How to use :
1, This product is suitable for TGZ580 V5 & beastx, and can be used for parameter setting and firmware upgrade.
2, Please connect the BLE2SYS to the SYS port of TGZ580 V5 or MICROBEAST PLUS BeastX.
3, Open StudioXM, select Bluetooth module BLE2SYS, and click Connect.
USB2SYS Interface for StudioX v3.3
USB-Interface for MICROBEAST, MICROBEAST PLUS, SPEKTRUM AR7200BX, SPEKTRUM AR7300BX, SPEKTRUM AR7210BX and BLE2SYS configuration.
You can download the StudioX Software for PC and Mac on the BeastX Website For free.
TGZ580 V5 x 1
Wires x 1
Manual x 1
Tool x 1